NEC NP-CR5450H - Page 20

20
6. WEB SERVER
Start the IMAGE EXPRESS UTILITY LITE
1. Connect the computer and the projector in a network.
2. Start the web browser on the computer and then access to the following URL:
URL=http://(Projector’s IP address)
• Projector’sIPaddressisindicatedattherightbottomoftheAPPSmenu.
The Web Sharing screen will be displayed on.
3. If [HTTP password] has been set for the IMAGE EXPRESS UTILITY LITE in NETWORK SETTING on the APPS
menu, input the password. The IMAGE EXPRESS UTILITY LITE screen will be displayed on after confirming
the password.
Control on the IMAGE EXPRESS UTILITY LITE screen
① ②
③ ⑤
④
⑥ ⑦ ⑧ ⑨
Number Explanation
①
Thumbnail Gallery
• ThumbnailsthataretransmittedtotheprojectorviatheImageExpressUtilityLiteorWirelessImage
Utility.ThumbnailswillbedisplayedinblackwhennooneusesthescreensortheIMAGEEXPRESS
UTILITYhasnotselectedonAPPSMENU.
• Enablestoswitchthethumbnaildisplayedpositionbythedraganddrop
②
Focus
• Focusisdisplayedonwithalightblueframe.
③
Changing screen split pattern
• Oncethe“SPLITPATTERN”buttonisclicked,itenablestochangescreensplitpattern.
Based on meeting purposes, you can select one pattern among 2×1, 2×2, 3×3, 4×4, 1×12.
④
Maximize the projected image
• Focusedimagewillbemaximizebyclick.Clickitagainfordisplayingtheimageinthepreviously
projected size.
⑤
Selection to Indicate or Not to indicate terminal names on the projected screen.
• Enables to switch either to indicate or not to indicate terminals’ information on the projected
screen
⑥
Update the thumbnail gallery
• Oncethe“UPDATE”buttonispressed,itupdateanddisplaythelatestthumbnailgallery.
⑦ ⑧
Page change
• Changethepagetodisplaytothepreviouspagebypressingthe“PREV”buttonandtothenextpage
bypressingthe”NEXT”button.