21
6. WEB SERVER
⑨
Terminal list
• ListofterminalsthatareconnectingwiththeprojectorviaImageExpressUtilityLiteorWireless
Image Utility.
• Theterminalnamescurrentlyshownonthedisplayarelistedingray.
• Abletoswitchthepositiontodisplaybythedraganddropterminalnames.
• TerminalnamescanbesortedbyclickingtheSORTBYNAME.
NOTE:
• Forutilizingthisfunction,imagestransmittedfromthecomputerandotherterminalsmustbeprojectedon.Formoredetailed
informationforutilizingtheImageExpressUtilityLiteandtheWirelessImageUtility,pleaseseetheHELPforeachapplication.
• Thisisthefunctionforexclusiveoneperson.Youcannotsharetousethisfunctionwhileithasbeenutilizedonothercomput-
ers.
6-3. PROJECTOR CONTROL
Thereare2typesofscreenavailable,a“PROJECTORADJUSTMENTS”screentocontroltheprojectoranda“NET-
WORKSETTINGS”tocongurethenetworksettings.Youcanswitchbetweenthese2screensusingthetabs.
Start the PROJECTOR CONTROL
1. Connect the projector and the computer in a network.
2. Boot up a browser on the computer and access to the WEB SERVER.
• Pleasereferto"HowtoaccesstheWEBSERVER"onpage16.
The screen of the WEB SHARING will be displayed.
• Clickthe[PROJECTORCONTROL]tabforswitchingittothePROJECTORCONTROL.
Controlling the projector (PROJECTOR ADJUSTMENTS)
Enable to control image and volume and switch the input terminal. At the same time, it can be used for checking the
lamp life remaining, lamp and filter hours.
Configure network settings (NETWORK SETTINGS)
See“7.NETWORKSETTINGS”fordetailsonthewiredLANandwirelessLANsettings.(→ page 22)
• Setthealertmail(ALERTMAIL)
Refer to Page 29 for the functional description.
• NETWORKSERVICE
SeteachloginpasswordfortheHTTPserverandPJLink,andvalidityofAMXBEACON.
• CRESTRONsetting
Refer to Page 30 for the functional description.
• Networkinformation(INFORMATION)
Displaytheinformationofthenetworksetinthisdevice.