NEC NP-CR5450H - Page 30

30
7. NETWORK SETTINGS
TESTMAIL Send a test mail to check whether your settings are correct or not.
NOTE:
• Ifyouexecuteatest,youmaynotreceiveanAlertmail.Shouldthishappen,checkifnetwork
settingsarecorrect.
• Ifyouenteredanincorrectaddressinatest,youmaynotreceiveanAlertmail.Shouldthis
happen,checkiftheRecipient’sAddressiscorrect.
CRESTRON SETTINGS
Configure the settings for connecting this device to a CRESTRON product.
Item Description
ROOMVIEW Check this when controlling the unit with a computer.
CRESTRONCONTROL
Check this when controlling the unit with a controller.
IP address Set the IP address of the controller.
IPID SettheIPIDofthecontroller.