NEC NP-CR5450H - Page 32

32
8. TOOLS
3. Make settings for each item as required.
ENABLE ����������������� Select to enable or disable the event�
DAY ������������������������ Select days of the week for the program timer� To execute the program from Monday to Friday, select [MON-
FRI]�
To execute the program in everyday basis, select [EVERY DAY]�
TIME ���������������������� Set the time to execute the program� Enter time in 24-hour notation�
FUNCTION ������������� Select a function to be executed� When [POWER] is selected, you can set powering ON/OFF at [ADVANCED
SETTINGS], when [SOURCE] is selected, you can set video signal at [ADVANCED SETTINGS] and when [ECO]
is selected, you can set [OFF]/[AUTO ECO]/[NORMAL]/[ECO] for ECO mode at [ADVANCED SETTINGS]�
ADVANCED SETTINGS �� Based on the selected item in [FUNCTION], select to power ON/OFF, a type of video source, and setting ECO
MODE to OFF/AUTO ECO/NORMAL/ECO�
REPEAT ������������������ Place a check mark to repeat the program continuing basis� To use the program this week only, clear the
check mark�
4. Focus on [OK] and press the ENTER button.
This will complete the settings.
You will be returned to the [PROGRAM LIST] screen.
5. Focus on [BACK] and press the ENTER button.
You will be returned to the [PROGRAM TIMER] screen.
6. Focus on [OK] and press the ENTER button.
You will be returned to the [TOOLS] screen.
NOTE:
• Upto30differenttimersettingscanbeprogrammed.
• Oncetheprogramnotmarkedwithacheckin[REPEAT]hasbeenexecuted,thecheckmarkinthe[ENABLE]checkboxwillbe
clearedautomaticallyandtheprogramwillbedisabled.
• Ifseveralprogramsaresetatthesametime,theseprogramsareexecutedinorderoftheprogramlistnumber.
• Theon-timesettingwillnotbeexecutedwhilethecoolingfansarerunningoranerrorisoccurring.
• Iftheoff-timesettingisexpiredundertheconditioninwhichthepoweroffisnotpossible,theoff-timersettingwillnotbeexecuted
untilthepoweroffbecomespossible.
• Programsnotmarkedwithacheckmarkin[ENABLE]ofthe[EDIT]screenwillnotbeexecutedevenifENABLEfortheProgram
Timerisnotactivated.
• Whentheprojectoristurnedonbyusingtheprogramtimerandifyouwanttoturnofftheprojector,settheoff-timeordoit
manuallysoasnottoleavetheprojectoronforalongperiodoftime.