NEC NP-U321H - 030-12. Aspect Adjust ]

29
3.13 [ 030-12. ASPECT ADJUST ]
Adjusts the aspect.
Command
03h 10h 00h 00h 05h 18h 00h 00h <DATA01> 00h <CKS>
Data part
Item Description
DATA01 Value set for the aspect
Information
For information about the values set for the aspect, see the Appendix "Supplementary Information by
Command".
Response
4 When the command succeeds
23h 10h <ID1> <ID2> 02h <DATA01> <DATA02> <CKS>
Data part
Item Description
DATA01
DATA02
Execution result
0000h Ended successfully.
Other than 0000h
Ended with an error.
4 When the command fails
A3h 10h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS>