NEC NP-U321H - 053-5. Lens Memory Option Request ]

50
3.25 [ 053-5. LENS MEMORY OPTION REQUEST ]
Gets the value set for the lens memory.
Command
02h 20h 00h 00h 01h <DATA01> <CKS>
Data part
Item Description
DATA01 Target
00h LOAD BY SIGNAL
01h FORCED MUTE
Response
4 When the command succeeds
22h 20h <ID1> <ID2> 02h <DATA01> <DATA02> <CKS>
Data part
Item Description
DATA01 Target
00h LOAD BY SIGNAL
01h FORCED MUTE
DATA02 Setting value
00h OFF
01h ON
4 When the command fails
A2h 20h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS>