NEC NP-U321H - 053-4. Reference Lens Memory Control ]

48
3.24 [ 053-4. REFERENCE LENS MEMORY CONTROL ]
Controls the reference lens memory.
Information
・ See [ 053-3. LENS MEMORY CONTROL ] for controlling the lens memory.
・ This command controls the profile number specified in [053-10 LENS PROFILE SET ].
Command
02h 1Fh 00h 00h 01h <DATA01> <CKS>
Data part
Item Description
DATA01 Operation
00h STORE
01h MOVE
02h RESET