NEC NP-U321H - Page 89

2. Standby Mode setting for receiving commands
The Standby Mode setting that can receive commands is different depending on the model.
Please see the table below.
Target command: "015. POWER ON"
■
Projector
Model name When connected using a serial cable When connected using via a wired LAN
NP-M403X / NP-M363X / NP-M323X / NP-M283X / NP-M403W / NP-
M363W / NP-M323W / NP-M333XS / NP-M353WS / NP-M303WS /
NP-M403H / NP-M323H / NP-M353HS / NP-M323HS / NP-M303HS
NORMAL, NETWORK STANDBY NETWORK STANDBY
NP-M402W / NP-M362W / NP-M402X / NP-M362X / NP-M322X /
NP-M282X / NP-M322W / NP-M352WS / NP-M302WS / NP-M332XS
NORMAL, NETWORK STANDBY NETWORK STANDBY
NP-P502HL / NP-P502WL
NP-P502H / NP-P502W / NP-P452H / NP-P452W
NORMAL, NETWORK STANDBY NETWORK STANDBY
NP-PA622U / NP-PA522U / NP-PA672W / NP-PA572W /
NP-PA722X / NP-PA622X
NORMAL, HTBaseT STANDBY HTBaseT STANDBY
NP-PA621U / NP-PA521U / NP-PA671W / NP-PA571W /
NP-PA721X / NP-PA621X
NORMAL, NETWORK STANDBY NETWORK STANDBY
NP-PH1202HL / PH1002HL
NORMAL, NETWORK STANDBY NETWORK STANDBY
NP-PX803UL
NORMAL, NETWORK STANDBY NETWORK STANDBY
NP-PX651X / NP-PX581W
NORMAL, NETWORK STANDBY NETWORK STANDBY
NP-PX602UL / PX602WL
NORMAL, NETWORK STANDBY NETWORK STANDBY
NP-U321H
NORMAL, NETWORK STANDBY NETWORK STANDBY
NP-UM301X / NP-UM301W / NP-UM361X / NP-UM351W
NP-UM352W
NORMAL, NETWORK STANDBY NETWORK STANDBY
NP-V332X / NP-V332W / NP-V302X / NP-V302W / NP-V302H
NORMAL, NETWORK STANDBY NETWORK STANDBY
Setting of the Standby Mode
4