NEC NP-UM330W - Page 11

ENG-8
ENG-9
3. Tighten the screw at thecenter of thesensor unit to fastenthe sensor unit to the
projector.

NOTE
• Toensuresafety,besuretotightenthescrewsecurely.Failuretodosomayresultinthe
sensor unit falling and causing injury.
• Holdthesensorunit,anddonotlifttheprojector.Liftingtheprojectorcoulddamagethe
sensor unit.
4. PasstheL-shapedconnectorsideoftheincludedUSBcablethroughtheprojector’s
securitybarandinsertitintothesensorunit’sUSBport(typeB).