NEC NP-UM330W - Page 12

ENG-10
ENG-11
2. Connect the projector to the computer.
The projector can be connected to a computer using the computer cable (supplied with the projec-
tor) or a commercially available HDMI cable.
3. Turn on the projector power and adjust the position and
focus of the projected image.
For the adjustment procedure, see the projector user’s manual.
4. Load the AAA battery in the stylus pen.
Loadingthebattery
1. Turnthebatterycapcounterclockwiseandremoveit.
Battery cap
2. Insertthenegativesideofthebattery(AAA)intothebatterycap.