94
6. Using On-Screen Menu
Using Software Keyboard to enter an encryption key
1. Select one of [Key 1], [Key 2], [Key 3] and [Key 4] and press the ENTER button.
The software keyboard will be displayed.
2. Use the SELECT
button to select one key and press the ENTER button.
3. After finishing entering the WEP key, use the SELECT
button to select [OK] and press the
ENTER button.
The software keyboard will disappear.
[Domain]
Host Name ............ Type in a hostname. Up to 60 alphanumeric characters can be used.
Domain Name ....... Type in domain name of the network connected to the projector. Up to 60 alphanumeric characters can be
used.
To Next Page
Loading...
