93
5. Using On-Screen Menu
Options Function
15:9 The image is displayed in 15:9 aspect ratio
16:10 The image is displayed in 16:10 aspect ratio
NATIVE The projector displays the current image in its true resolution when the incoming computer signal has a
lower or higher resolution than the projector’s native resolution. (→ page 2)
When the incoming computer signal has a higher resolution than the projector’s native resolution, the
center of an image will be displayed.
LETTER BOX The image of a letterbox signal (16:9) is stretched equally in the horizontal and vertical directions to t the
screen.
WIDE SCREEN The image of a squeeze signal(16:9) is stretched left and right in 16:9.
ZOOM The image of a squeeze signal (16:9) is stretched left and right in 4:3.
Parts of the displayed image are cropped at the left and right edges and therefore not visible.
FULL Project to full screen size.
TIP:
• Image position can be adjusted vertically using [POSITION] when the [16:9], [15:9], or [16:10] aspect ratios are selected.
• The term “letterbox” refers to a more landscape-oriented image when compared to a 4:3 image, which is the standard aspect
ratio for a vide source.
The letterbox signal has aspect ratios with the vista size “1.85:1” or cinema scope size “2.35:1” for movie film.
• The term “squeeze” refers to the compressed image of which aspect ratio is converted from 16:9 to 4:3.
[INPUT RESOLUTION]
The resolution is assigned automatically when the resolution of the input signal from the computer video input terminal
(analog RGB) cannot be distinguished.
To Next Page
Loading...
