50
3. Convenient Features
NETWORK SETTINGS
http://<IP Address of Projector (Basic)>/index.html
• SETTINGS
WIRED LAN
INTERFACE Select [LAN] for connecting LAN by wire thru the LAN port.
Select [HDBaseT] for connecting LAN by wire thru the HDBaseT IN/Ethernet port.
SETTING Set for wired LAN.
PROFILE 1/PROFILE 2 Two settings can be set for wired LAN connection. Select PROFILE 1 or PROFILE 2.
DISABLE Turn off wired LAN connection. The POWER indicator that is informing the STANDBY
state will start to blink in orange long interval (→ page 165).
DHCP ON Automatically assign IP address, subnet mask, and gateway to the projector from your
DHCP server.
DHCP OFF Set IP address, subnet mask, and gateway to the projector assigned by your network
administrator.
IP ADDRESS Set your IP address of the network connected to the projector.
SUBNET MASK Set your subnet mask number of the network connected to the projector.
GATEWAY Set the default gateway of the network connected to the projector.
AUTO DNS ON DHCP server will automatically assign IP address of DNS server connected to the
projector.
AUTO DNS OFF Set your IP address assigned by your network administrator.
DNS Set your IP address of DNS server connected to the projector.
SAVE Click this button to save your settings to the projector’s memory.
APPLY Apply your settings to wired LAN.
To Next Page
Loading...
