NEC Display Solutions of America, Inc.
PA653U/PA803U/PA853W/PA903X Installation Guide
Desktop and Ceiling Mount Rev 1.5
www.necdisplay.com PA653U/PA803U/PA853W/PA903X Page 1 of 14
Contents
Product Description, Lens Specs, Screen/Aspect Ratio
Notes and Formulas Pg 1
Distance Charts and Formulas Pg 2-4
Ceiling Mount/Desktop Installation Pg 5
Lens Shift Adjustable Range Pg 6
Cabinet Dimensions Pg 7-8
Lens Dimensions (Optional) Pg 9-12
Ceiling Mount Dimensions and Input Panel Pg 13
Control Codes Pg 14
Product Description
Type: 3 panel LCD projector, Dimensions: 19.8”(W) x 6.6”(H) x 14.4”(D)
0.76 p-Si TFT w/MLA Weight: 18.5 lbs
Resolution: 1920 x 1200 (16:10) Brightness: PA653U: 6500 Lumens
1920 x 1200 (16:10) PA803U: 8000 Lumens
1280 x 800 (16:10) PA853W: 8500 Lumens
1024 x 768 (4:3) PA903X: 9000 Lumens
Fan Noise: 39 dB / 33dB @ 1 meter
Power Consumption: 460W (max) BTU’s: 1571 BTU/hour
Network Ready, integrated wired and wireless adapter
Manual: Lens Shift, Horizontal & Vertical /Zoom/ Focus
Lens Specifications
NP11FL: Throw Ratio: ~ 0.8:1 Focal Length: 13.2mm NP30ZL: Throw Ratio: 0.79 – 1.04:1 Focal Length: 13.2 – 17.2mm
Screen Sizes: 40”-150” F/#:2.3 Screen Sizes: 40” - 500” F/#:1.9 -2.1
NP12ZL: Throw Ratio: 1.16 - 1.52:1 Focal Length: 19.4 – 25.3mm NP40ZL: Throw Ratio: 0.79 – 1.11:1 Focal Length: 13.8 – 18.6mm
Screen Sizes: 30” - 500” F/#:2.2 – 2.69 _________ Screen Sizes: 50” - 500” F/#:2.0 -2.5
NP13ZL: Throw Ratio: 1.46 – 2.95:1 Focal Length: 24.4 – 48.6mm NP41ZL: Throw Ratio: 1.30 – 3.02:1 Focal Length: 21.8 – 49.8mm
Screen Sizes: 40” - 500” F/#:1.7 – 2.37 _________ Screen Sizes: 50” - 500” F/#:1.7 – 2.0
NP14ZL: Throw Ratio: 2.90 -4.68:1 Focal Length: 48.5 - 77.6mm NP42ZL: Throw Ratio: 2.99 – 5.98:1 Focal Length: 13.2 – 17.2mm
Screen Sizes: 60” - 500” F/#:2.2 -2.64 _________ Screen Sizes: 50” - 500” F/#:2.2 -2.3
Screen/Aspect Ratio
4:3, 16:9 and 16:10 screens are fully supported with proper aspect ratio control for both type sources using NEC developed
scaling technology. Menu selections have settings for each screen type and aspect ratio control for each source type.
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table..
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary 5%.