Issue 1.0
SL2100 DT920 (ITK-8LCX) User Guide 11
2 Download Set the data required when downloading a file. –
1 Download Files
Select this option to download files for Music on Hold, ringer tone,
Directory and Wallpaper.
–
1 Hold Music Select this option to download a file for Music on Hold. MOH.wav
2 Ring Tone Select this option to download files for ringer tones (Download 1 to 3). –
1 Music Ring 1 Select this option to download a file for ringer tone (Download 1). Melody1.wav
2 Music Ring 2 Select this option to download a file for ringer tone (Download 2). Melody2.wav
3 Music Ring 3 Select this option to download a file for ringer tone (Download 3). Melody3.wav
3 Directory Not supported on SL2100. Directory.csv
4 Wallpaper
Note: Wallpaper is not
supported at this
time.
Select this option to download a file for Wallpaper. WallPaper.bmp
2 Download Address
Select this option to enter an IP address of the FTP/TFTP/HTTPS
server.
0.0.0.0
3 Protocol
Select this option to specify a protocol of the server (either FTP or
TFTP or HTTPS).
FTP
4 Account Settings
Select this option to set necessary data when using FTP or HTTPS
service.
–
1 User ID
Select this option to enter a user ID for downloading via FTP or HTTPS
server.
–
2 Password
Select this option to enter a password for downloading via FTP or
HTTPS server.
–
3 Folder
Select this option to specify the directory where the downloaded file is
stored.
–
3 Data Backup/Restore Select this option to set the data required for a file backup/restore. –
1 Data Backup Select this option to specify the file name to be backed up. PersonalData.tgz
2 Data Restore Select this option to specify the file name to be restored. PersonalData.tgz
3 Server Address
Select this option to enter an IP address of the FTP/TFTP/HTTPS
server.
0.0.0.0
4 Protocol
Select this option to select a protocol of the server (either FTP, TFTP or
HTTPS).
FTP
5 Account Settings
Select this option to set necessary data when using FTP or HTTPS
server.
–
1 User ID
Select this option to enter a user ID for the data backup via FTP or
HTTPS server.
–
2 Password
Select this option to enter a password for data backup via FTP or
HTTPS server.
–
3 Folder
Select this option to specify the destination directory of FTP or HTTPS
server.
–
Menu Item Description Default Value
To Next Page
Loading...
