32 | SPECTRAVIEW II - USER’S GUIDE
Monitor Settings window
The Monitor Settings window provides access to some of the display monitor control settings, if supported by
the display.
The Power LED Indicator controls can be used to change the color of the LED, and also adjust the brightness.
The brightness can be reduced as necessary in dim environments if the LED is distracting.
The ColorComp control adjusts the screen uniformity correction applied to the display in order to improve the
screen luminance and color uniformity. This compensation is done at the expense of some screen brightness.
A higher level of correction will give a more uniform screen, but the maximum Intensity (brightness) that can be
achieved will be lower.
It is recommended to recalibrate if the ColorComp setting is changed.
To Next Page
Loading...
