Chapter 3 Operation Settings
123
If the IOPORT_MANAGER parameter is not specified, the system uses socket port
number 8030 (default).
The socket port number to be specified must be the same as the socket port number on the
NEC Storage Manager (replication management) side. For information about setting a
socket port number on the NEC Storage Manager (replication management) side, refer to
the “NEC Storage Manager User’s Manual”.
•
••
• Data Being Received message output
Specify whether or not to output the message indicating that data is being received from the
NEC Storage Manager (replication management) in the iSMrc_ldlist command.
RPL_RECV_MSG=USE
Outputs the Data Being Received message (default).
RPL_RECV_MSG=UNUSE
Does not output the Data Being Received message.
To Next Page
Loading...
