NEC Storage Manager - Replication Operation Option Setting File

Chapter 2 Command Reference
31
-wait [second ] | -nowait Specify whether to wait for completion of Separate.
If -wait is specified, it waits until difference reflection
of MV/RV is complete.
It also monitors process state in a certain time interval.
The monitoring time interval is 5 seconds. If a value is
specified in second, the monitoring time interval of the
disk array becomes the specified value. The unit is
second, and the available range is from 1 through 30
seconds (integer). This value can be changed in the
replication operation option setting file on the Windows
system and in the environment variable on the UNIX
system. For details, refer to Chapter 3 “Operation
Settings”.
If this argument is omitted, the operation is the same as
the operation when -nowait is specified.
If -force is specified, this argument is ignored.
-file file_name To specify multiple pairs, describe the pairs of MV/RV in
file_name.
The copy operation instruction is specified in the
argument. If multiple pairs are specified, a copy request
is issued to the pairs simultaneously, and the operation
instruction is reflected to all the pairs.
For the description format of file_name, refer to 1.3
“Replication Operation File”.
When multiple pairs are specified, if an error occurs in
some pairs, the process is continued until it is terminated
in all the specified pairs.
-? Displays the usage of this command (Windows).
-help Displays the usage of this command (UNIX).