NEC Storage Manager - Ismrc_Replicate

Chapter 2 Command Reference
22
• RV:disk_number ld_name type
volume name
path
MV/RV physical disk number, logical disk name, OS type, mount point volume
name, and drive letters or path name mounted to the folder of the NTFS volume
accessed by users
• Replicating.....
Message in Replicate execution
The display of this message can be suppressed by setting an option. For details
on the option setting, refer to 3.1 “Replication Operation Option Setting File”.
• Replicate Normal End YYYY/MM/DD hh:mm:ss
Replicate end message and end time
(2) When -wait has been specified, the copy difference remains unchanged for the period of
time (30 seconds) set in RPL_ENDWATCHDEV of the replication operation option setting
file, and the operation terminated abnormally, the following information is displayed:
(Individual specification)
C:\>iSMrc_replicate -mv ld_name -mvflg ld -rv ld_name -rvflg ld -wait 2
Replicate Start YYYY/MM/DD hh:mm:ss
MV:disk_number ld_name type
volume name
path
RV:disk_number ld_name type
volume name
path
iSMrc_replicate: Error: iSM13663: The processing of waiting has terminated because
"separate diff" or "copy diff" does not decrease in the specified time. (30 sec)
Replicate Abnormal End YYYY/MM/DD hh:mm:ss
MV:disk_number ld_name type
volume name
path
RV:disk_number ld_name type
volume name
path
C:\>
Description of messages:
The following is displayed as an error message.
iSMrc_replicate: Error: iSM13663: The processing of waiting has
terminated because "separate diff" or "copy diff" does not decrease
in the specified time. (30 sec)