NEC Storage Manager - Page 28

Chapter 2 Command Reference
23
On the UNIX system
(1) When the command terminates normally with the -wait specification, the following
information is displayed.
(Individual specification)
# iSMrc_replicate -mv special_file_name -mvflg sfn -rv
special_file_name -rvflg sfn -wait 2
Replicate Start YYYY/MM/DD hh:mm:ss
MV:special_file_name LD Name type
RV:special_file_name LD Name type
Replicating.....
Replicate Normal End YYYY/MM/DD hh:mm:ss
MV:special_file_name LD Name type
RV:special_file_name LD Name type
#
Description of messages:
• Replicate Start YYYY/MM/DD hh:mm:ss
Replicate start message and start time
• MV:special_file_name LD Name type
RV:special_file_name LD Name type
MV/RV’s special file name, logical disk name, OS type
• Replicating.....
Message that appears during Replicate execution
The display of this message can be suppressed by setting an option. For details
of the option setting, refer to 3.2 “Environment Variables”.
• Replicate Normal End YYYY/MM/DD hh:mm:ss
Replicate end message and end time
(2) When -wait has been specified, and the copy difference remains unchanged for the period
of time (30 seconds) set in RPL_ENDWATCHDEV of the environment variable, and the
operation terminated abnormally, the following information is displayed.
(Individual specification)
# iSMrc_replicate -mv special_file_name -mvflg sfn -rv
special_file_name -rvflg sfn -wait 2
Replicate Start YYYY/MM/DD hh:mm:ss
MV:special_file_name LD Name type
RV:special_file_name LD Name type
Replicating.....