NEC Storage Manager - Ismrc_Separate

Chapter 2 Command Reference
33
(2) When -wait has been specified, the copy difference remains unchanged for the period of
time (30 seconds) set in RPL_ENDWATCHDEV of the replication operation option setting
file, and the operation terminated abnormally, the following information is displayed:
(Individual specification)
C:\>iSMrc_separate -mv ld_name -mvflg ld -rv ld_name -rvflg ld -wait 2
Separate Start YYYY/MM/DD hh:mm:ss
MV:disk_number ld_name type
volume name
path
RV:disk_number ld_name type
volume name
path
Separating.....
iSMrc_separate: Error: iSM13663: The processing of waiting has terminated because
"separate diff" or "copy diff" does not decrease in the specified time. (30 sec)
Separate Abnormal End YYYY/MM/DD hh:mm:ss
MV:disk_number ld_name type
volume name
path
RV:disk_number ld_name type
volume name
path
C:\>
Description of messages:
The following is displayed as an error message.
iSMrc_separate: Error: iSM13663: The processing of waiting has
terminated because "separate diff" or "copy diff" does not decrease
in the specified time. (30 sec)
On the UNIX system
(1) When the command terminates normally with the -wait specification, the following
information is displayed.
(Individual specification)
# iSMrc_separate -mv special_file_name -mvflg sfn -rv
special_file_name -rvflg sfn -wait 2
Separate Start YYYY/MM/DD hh:mm:ss
MV:special_file_name LD Name type
RV:special_file_name LD Name type
Separating.....
Separate Normal End YYYY/MM/DD hh:mm:ss