NEC Storage Manager - Page 26

Chapter 2 Command Reference
21
-file file_name To specify multiple pairs, describe the pairs of MV/RV in file_name.
The copy operation instruction is specified in the argument. If multiple
pairs are specified, a copy request is issued to the pairs simultaneously, and
the operation instruction is reflected to all the pairs.
For the description format of file_name, refer to 1.3 “Replication
Operation File”.
When multiple pairs are specified, if an error occurs in some pairs, the
process is continued until it is terminated in all the specified pairs.
-? Displays the usage of this command (Windows).
-help Displays the usage of this command (UNIX).
[ DISPLAYED INFORMATION ]
On the Windows system
(1) Information when the command terminates normally with -wait specification is displayed.
(Individual specification)
C:\>iSMrc_replicate -mv ld-name -mvflg ld -rv ld-name -rvflg ld -wait 2
Replicate Start YYYY/MM/DD hh:mm:ss
MV:disk_number ld_name type
volume name
path
RV:disk_number ld_name type
volume name
path
Replicating.....
Replicate Normal End YYYY/MM/DD hh:mm:ss
MV:disk_number ld_name type
volume name
path
RV:disk_number ld_name type
volume name
path
C:\>
Description of messages:
• Replicate Start YYYY/MM/DD hh:mm:ss
Replicate starting message and Start Time
• MV:disk_number ld_name type
volume name
path