NEC Storage Manager - Page 48

Chapter 2 Command Reference
43
[ DISPLAYED INFORMATION ]
On the Windows system
(1) Information when the command terminates normally with -wait specification is displayed.
(Individual specification)
C:\>iSMrc_restore -mv ld_name -mvflg ld -rv ld_name -rvflg ld -wait 2
iSMrc_restore: Info: iSM13224: MV is restored.
Volume Name: volume name
MountPoint drive letter or mount point
Umount Start YYYY/MM/DD hh:mm:ss
Umount Normal End YYYY/MM/DD hh:mm:ss
Restore Start YYYY/MM/DD hh:mm:ss
MV:disk_number ld_name type
volume name
path
RV:disk_number ld_name type
volume name
path
Mount Start YYYY/MM/DD hh:mm:ss
Mount Normal End YYYY/MM/DD hh:mm:ss
Restoring.....
Restore Normal End YYYY/MM/DD hh:mm:ss
MV:disk_number ld_name type
volume name
path
RV:disk_number ld_name type
volume name
path
C:\>
Description of messages:
• iSMrc_restore: Info: iSM13224: MV is restored.
Volume Name: Volume_name
Mount Point: drive letter or mount point
Mount point volume name of MV, and drive letter or NTFS folder name
• Umount Start YYYY/MM/DD hh:mm:ss
Message indicating the start of unmounting MV, and start time
• Umount Normal End YYYY/MM/DD hh:mm:ss
Message indicating the end of unmounting MV, and end time
• Restore Start YYYY/MM/DD hh:mm:ss
Message indicating the start of restore, and start time
• MV:disk_number ld_name type
volume name
path