NEC Storage Manager - Page 62

Chapter 2 Command Reference
57
(2) The -suspend command resumes the suspended copy control state in the Sync copy mode.
(Individual specification)
C:\>iSMrc_change -sync -mv dev001 -mvflg ld -rv dev101 -rvflg ld
Change Start 2001/01/28 18:14:44
MV:1 dev001 WN
\\?\Volume{69facee0-58a7-11d5-ad3e-806d6172696f}\
E:
RV:2 dev101 WN
-
-
Change Normal End 2001/01/28 18:14:44
MV:1 dev001 WN
\\?\Volume{69facee0-58a7-11d5-ad3e-806d6172696f}\
E:
RV:2 dev101 WN
-
-
C:\>
On the UNIX system
(1) This command suspends the Copy Control State.
(Individual specification)
# iSMrc_change -suspend -mv /dev/rdsk/c0t1d0 -mvflg sfn -rv
/dev/rdsk/c0t2d0 -rvflg sfn
Change Start 2000/10/10 09:11:23
MV:/dev/rdsk/c0t1d0 disk001 NX
RV:/dev/rdsk/c0t2d0 disk002 NX
Change Normal End 2000/10/10 09:11:24
MV:/dev/rdsk/c0t1d0 disk001 NX
RV:/dev/rdsk/c0t2d0 disk002 NX
#