Chapter 2 Command Reference
71
-file file_name To specify multiple pairs, describe the pairs of MV/RV in
file_name.
The copy operation instruction is specified in the
argument. If multiple pairs are specified, a copy request
is issued to the pairs simultaneously, and the operation
instruction is reflected to all the pairs.
For the description format of file_name, refer to 1.3
“Replication Operation File”.
When multiple pairs are specified, if an error occurs in
some pairs, an error message indicating that is displayed,
and the process is continued until it is terminated in all
the specified pairs.
-? Displays the usage of this command (Windows).
-help Displays the usage of this command (UNIX).
[ DISPLAYED INFORMATION ]
On the Windows system
C:\>iSMrc_query -mv dev001 -mvflg ld
MV: Disk No. mv_disk_number
LD Name mv_ld_name
Type mv_type
Volume Name mv_volume_name
Path mv_path
RV: Disk No. rv_disk_number
LD Name rv_ld_name
Type rv_type
Volume Name rv_volume_name
Path rv_path
Activity State aaaa
Sync State bbbb
Copy Control State cccc
<State> Start Time YYYY/MM/DD hh:mm:ss
<State> End Time YYYY/MM/DD hh:mm:ss
Separate Diff eeeeKB
Copy Diff ffffKB
RV Access gg
Previous Active hhhh
C:\>
To Next Page
Loading...
