NEC Storage Manager - Page 85

Chapter 2 Command Reference
80
[ USAGE ]
On the Windows system
The command displays volume name information.
C:\>iSMrc_sense -vol rpl302_7 -volflg ld
Disk No. 21
LD Name rpl302_7
VAA 30000000000000020302
Type NX
Volume Name \\?\Volume{69facee0-58a7-11d5-ad3e-806d6172696f}\
Path R:
C:\>
On the UNIX system
Volume name information is displayed.
# iSMrc_sense -vol /dev/rdsk/c5t2d0 -volflg sfn
Special file LD NAME VAA Type
/dev/rdsk/c5t2d0 disk001 30000000000000020010 NX
#
[ NOTES ]
The following notes apply to the case when joint operation with the replication management is not
performed (the I/O issuance to disk arrays is directly controlled via FC).
• The target volume is registered in the Volume List.
• Specifying volume of a dynamic disk is not allowed.
• A Volume List is not being created.
• To specify a volume group, the target volume group must be active.
• To specify a disk group, the target disk group must be active.
• The iSM special file is not being created (the UNIX system HP-UX version only).
[ RETURN VALUE ]
0: Operation for all the paired volumes terminated normally.
1: Operation for all the paired volumes terminated abnormally.
2: Operation for some paired volumes terminated abnormally.
[ ERRORS ]
This command terminates abnormally in the following cases.
• A parameter is invalid.
• The instruction fails due to a disk array error.