Chapter 2 Command Reference
83
[ NOTES ]
• The operation target volume must have been registered in the Volume List.
• The operation target volume must be available for Read/Write.
• Specifying volume of a dynamic disk is not allowed.
• The drive of the specified name must be mounted.
• This command flushes only the Windows file system. Therefore, it cannot flush the data of an
application which processes its own cache. To flush the data from the application to the disk,
flush the data of the application first, and then use this command to flush the file system.
[ RETURN VALUE ]
0: Normal termination
1: Abnormal termination
[ ERRORS ]
This command terminates abnormally in the following cases.
• A parameter is invalid.
• If the system function (Win32API) fails.
To Next Page
Loading...
