Chapter 2 Command Reference
90
-init Initializes the signature on the physical disk. If -all is
specified, signature information of all disks is initialized.
If disk_number is specified, only the signatures of the
target physical disks are initialized.
-list Displays the list of disk signatures saved by -read,
signatures on the physical disk, and signatures saved in
the disk array. If -all is specified, signature
information of all disks is displayed. If disk_number
is specified, only the signatures of the target physical
disks are displayed.
-export Writes the disk signature information to the specified file.
If -all is specified, signature information of all disks is
written to the file. If disk_number is specified, only
the signatures of the target physical disks are written to
the file.
-import Reads the disk signature information recorded in the
specified file from the file and registers it. If -all is
specified, signature information of all disks is read from
the file and registered. If disk_number is specified,
only the signatures of the target physical disks are read
from the file and registered.
file_name Specify the file name to which the disk signature
information is written, or from which it is read.
-dskn disk_number Specify the disk number of the physical disk to which the
disk signature operation is performed.
-all Performs the disk signature operation for all the physical
disks connected to the host.
-? Displays the usage of this command.
To Next Page
Loading...
