NEC SV8100 Quick Start Guide

1. On the top chassis, press the power switch to the off position
2. On the bottom chassis, press the power switch to the off position
3. The system will power down, leave the system powered off if required (Due to electrical
work being carried out)
4. Alternatively, count to 10 and then press the power switch to the on position on the top
chassis
5. Press the power switch to the on position on the bottom chassis
6. The system should be up and operational within 5 minutes.
Reboot/Power Down for 3 Chassis System
In the event of a reboot or complete power down, if you have 3 chassis’, please follow the
instructions below.
1. On the top chassis, press the power switch to the off position
2. On the middle chassis, press the power switch to the off position
3. On the bottom chassis, press the power switch to the off position
4. The system will power down, leave the system powered off if required (Due to electrical
work being carried out)
5. Alternatively, count to 10 and then press the power switch to the on position on the top
chassis
6. Press the power switch to the on position on the middle chassis
7. Press the power switch to the on position on the bottom chassis
8. The system should be up and operational within 5 minutes.
Reboot/Power Down for 3 Chassis System
In the event of a reboot or complete power down, if you have 4 chassis’, please follow the
instructions below.
1. On the top chassis, press the power switch to the off position
2. On the middle chassis, press the power switch to the off position
3. On the next chassis, press the power switch to the off position
4. On the bottom chassis, press the power switch to the off position
5. The system will power down, leave the system powered off if required (Due to electrical
work being carried out)
6. Alternatively, count to 10 and then press the power switch to the on position on the top
chassis
7. Press the power switch to the on position on the middle chassis
8. On the next chassis, press the power switch to the off position
9. Press the power switch to the on position on the bottom chassis

NEC SV8100 Specifications

General

VoIP Support	Yes
Conference Calls	Yes
Auto Attendant	Yes
Supported Protocols	SIP, H.323
Operating Temperature	0°C to 40°C
Networking	Yes, via IP
Voice Mail	Integrated Voice Mail
Unified Messaging	Yes
Power Supply	100-240V AC, 50/60Hz
Humidity	20% to 80% non-condensing