NEC SV8300 - Called Party Recognition Service (Direct-In Termination (DIT))

UNIVERGE SV8300 Features and Specifications Manual (ISDN/Q-SIG)
NWA-033632-001, Issue 1
Page 7
Called Party Recognition Service (Direct-In Termination (DIT))
Called Party Recognition Service
(Direct-In Termination (DIT))
General Description
This feature provides an incoming Direct-In Termination (DIT) call via an ISDN trunk to be connected to a pre-
determined station. This application can be used for a station or modem.
Operating Procedure
No manual operation is required.
Station Application
All stations
Service Conditions
1. For incoming calls in a Primary Rate Interface trunk, this service feature should be used only when DID
trunks are not desired.
2. Refer to the Features and Specifications Manual (Business/Hotel) for details on service conditions.