NEC T1000 - Setup; Reset to Factory Defaults

OSD Menu
29ENGLISH
Balance
This control allows you to adjust the balance of the left and right apeaker output.
. Press [MENU] button to display the main OSD menu.
. Select the Sound main menu with [Y]or[B] button on the
remote control.
. Press [ENTER] / ["] to enter the sub menu.
. Select Balance and press [ENTER] / ["] button to enter the
sub menu. Then you can see the Balance bar.
. Adjust the balance with [A]/["] button.
. Then press [MENU] button.
Equalizer
You can use the OSD menu to change the Treble, Bass and Balance according to your preference.
. Press [MENU] button to display the main OSD menu.
. Select the Sound main menu with [Y]or[B] button on the
remote control.
. Press [ENTER] / ["] to enter the sub menu.
. Select Equalizer and press [ENTER] / ["] button to enter
the sub menu. Then you can see the Equalizer bar.
. Select a gain bar with [Y]or[B] button on the remote con-
trol and adjust it with [A]/["] button.
. Press [MENU] button on the remote control to exit equali-
zer. The result will be saved automatically.
ENGLISH