NEC T1000 - PIP - Size; PIP - Position

OSD Menu
37ENGLISH
PIP - Size
. Press [MENU] button to display the main OSD menu.
. Select the PIP main menu with [Y]or[B] button on the re-
mote control.
. Press [ENTER] / ["] to enter the sub menu.
. Select Size and press [ENTER] / ["]button toenter thesub
menu. Then you will see the popup menu.
. Selectthesizewith[Y]or[B] button and press [MENU] /
[A] button.
PIP - Position
. Press [MENU] button to display the main OSD menu.
. Select the PIP main menu with [Y]or[B] button on the re-
mote control.
. Press [ENTER] / ["] to enter the sub menu.
. Select Position and press [ENTER] / ["] buttonto enterthe
sub menu. Then you will see the popup menu.
. Select the PIP position with [Y]or[B] button and press
[MENU]/[A] button.
PIP - Swap
Using swap fuction, you can exchange two programs or sources at the same time.
. Press [MENU] button to display the main OSD menu.
. Select the PIP main menu with [Y]or[B] button on the re-
mote control.
. Press [ENTER] / ["] to enter the sub menu.
. Select Swap and press [ENTER] button to swap two pro-
grams or sources that you want.
. Press [MENU] button to return.
ENGLISH