NEC T1000 - PIP (Picture In Picture); PIP - Input Source

OSD Menu
36 ENGLISH
PIP (Picture In Picture)
You can watch two programs or sources at the same time. And set up PIP size and position.
. Press [MENU] button to display the main OSD menu.
. Select the PIP main menu with [Y]or[B] button on the re-
mote control.
. Press [ENTER] / ["] to enter the sub menu.
. Select PIP and press [ENTER] / ["] button to enter the sub
menu. Then you will see the popup menu.
. Select the On / Of f with [Y]or[B] button and press [MENU]
/[A] button.
PIP - Input Source
You can watch two programs or sources at the same time. And set up PIP size and position.
. Press [MENU] button to display the main OSD menu.
. Select the PIP main menu with [Y]or[B] button on the re-
mote control.
. Press [ENTER] / ["] to enter the sub menu.
. Select Input Source and press [ENTER] / ["] button to en-
ter the sub menu. Then you will see the popup menu.
. Select the input source (Component / DVI / PC) with [Y]or
[B] button and press [MENU] / [A] button.