NEC U250X - Page 14

ENG-14
ENG-15
4. Adjust the tilt.
Tilt adjustment is performed with the four adjustment knobs.

Front/rear tilt adjustment
Adjust together
Rotation axis
Adjust together
Rotation axis

Left/right tilt adjustment
Fine adjustment in same direction as for vertical adjustment
•Iftiltadjustmentachievedwiththeseknobsisnotsufcient,repeattheadjustmentprocessfrom
step 2 on page ENG-12.
•Duringadjustment,thepositionoftheprojectedimagemayshift.Insuchacase,loosenthewall
adapter and arm fixation screws and adjust the position.
This completes the adjustment.
Securely tighten all screws and adjustment knobs.