NEC UM351W - Page 48

37
3. Convenient Features
NOTE:
• When[COMPUTER]isselectedfromyoursourceselection,theVirtualRemotescreenorthetoolbarwillbedisplayedaswellas
yourcomputerscreen.
• Usethesuppliedcomputercable(VGA)toconnecttheCOMPUTERINterminaldirectlywiththemonitoroutputterminalofthe
computertouseVirtualRemoteTool.
 Usingaswitcherorothercablesthanthesuppliedcomputercable(VGA)maycausefailureinsignalcommunication.
 VGAcableterminal:
 PinNos.12and15arerequiredforDDC/CI.
• VirtualRemoteToolmaynotworkdependingonyourcomputer’sspecicationsandversionofgraphicadaptersordrivers.
• TorunVirtualRemoteToolonWindows8.1,Windows8andWindowsXP,“Microsoft.NETFrameworkVersion2.0”isrequired.
TheMicrosoft.NETFrameworkVersion2.0,3.0or3.5isavailablefromMicrosoft’swebpage.Downloadandinstallitonyour
computer.
• Logodata(graphics)thatcanbesenttotheprojectorwithVirtualRemoteToolhasthefollowingrestrictions:
 (OnlyviaserialorLANconnection)
- Filesize:Lessthan1MB
- Imagesize(resolution):
 UM361X/UM301X:Horizontal1024×vertical768dotsorless
 UM351W/UM301W:Horizontal1280×vertical800dotsorless
- Numberofcolors:256colorsorless
• Toputthedefault"NEClogo"backinthebackgroundlogo,youneedtoregisteritasthebackgroundlogobyusingtheimagele
(UM351W/UM301W:/Logo/necpj_bbwx.bmp,UM361X/UM301X:/Logo/necpj_bb_x.bmp)incluldedonthesuppliedNECProjector
CD-ROM.
TIP:
• Theprojector’s COMPUTERIN terminalsupports DDC/CI (DisplayData Channel CommandInterface).DDC/CI is astandard
interfaceforbidirectionalcommunicationbetweendisplay/projectorandcomputer.
Step 1: Install Virtual Remote Tool on the computer
NOTE:
• ToinstallVirtualRemoteTool,theWindowsuseraccountmusthave“Administrator”privilege(Windows8.1,Windows8,Windows
7,andWindowsVista)or"ComputerAdministrator"privilege(WindowsXP).
• ExitallrunningprogramsbeforeinstallingVirtualRemoteTool.Ifanotherprogramisrunning,theinstallationmaynotbecom-
pleted.
1 InserttheaccompanyingNECProjectorCD-ROMintoyourCD-ROMdrive.
The menu window will be displayed.