NEC UM351W - Page 93

To Next Page

To Previous Page

5. Using On-Screen Menu

AdjustingHorizontal/VerticalPosition[HORIZONTAL/VERTICAL]

Adjuststheimagelocationhorizontallyandvertically.

- Animagecanbedistortedduringtheadjustmentof[CLOCK]and[PHASE].Thisisnotmalfunction.

- Theadjustmentsfor[CLOCK],[PHASE],[HORIZONTAL],and[VERTICAL]willbestoredinmemoryforthe

currentsignal.Thenexttimeyouprojectthesignalwiththesameresolution,horizontalandverticalfrequency,

itsadjustmentswillbecalledupandapplied.

 Todeleteadjustmentsstoredinmemory,fromthemenu,youselect[RESET]→[CURRENTSIGNAL]or[ALL

DATA]andresettheadjustments.

SelectingOverscanPercentage[OVERSCAN]

Selectoverscanpercentage(AUTO,0%,5%and10%)forsignal.

Projected image

Overscaned by 10%

NOTE:

• The[0[%]]cannotbeselectedwhenVIDEOsignalisused.

• The[OVERSCAN]itemisnotavailable:

- when[NATIVE]isselectedfor[ASPECTRATIO].

Other manuals for NEC UM351W