NEC UM361XI - [ 097-8. Eco Mode Request ]

©NEC Display Solutions, Ltd. 2014-2017 70
3.41 [ 097-8. ECO MODE REQUEST ]
Gets the value set for the eco mode.
Information 
Depending on the projector, the value for the "Light mode" or "Lamp mode" will be returned.
Command
03h B0h 00h 00h 01h 07h BBh
Response
 When the command succeeds
23h B0h <ID1> <ID2> 02h 07h <DATA01> <CKS>
Data part
Item Description
DATA01 Value set for the eco mode
 Information 
For information about the values set for the eco mode, see the Appendix "Supplementary Information by
Command".
 When the command fails
A3h B0h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS>