©NEC Display Solutions, Ltd. 2014-2017 83
3.52 [ 305-3. BASIC INFORMATION REQUEST ]
Gets the basic information about the operation status of the projector.
Command
00h BFh 00h 00h 01h 02h C2h
Response
When the command succeeds
20h BFh <ID1> <ID2> 10h 02h <DATA01> - <DATA15> <CKS>
Data part
Item Description
DATA01 Operation status
00h Standby (Sleep) 06h Standby (error)
04h Power on 0Fh Standby (Power saving)
05h Cooling 10h Network standby
DATA02 Content displayed
00h Video signal displayed 04h LAN displayed
01h No signal 05h Test pattern (user) displayed
02h Viewer displayed 10h Signal being switched
03h Test pattern displayed
− −
DATA03 Selection signal type 1
01h 1 04h 4
02h 2 05h 5
03h 3
− −
To Next Page
Loading...
