NEC UNIVERGE DT930 - Page 16

INTRODUCTION
6
NO.
NAME
FUNCTION
(1)
Handset
Used for sending/receiving voice.
(2)
Back key
To return previous window.
(3)
Speaker
Originating a call with handsfree.
(4)
Dial keypad
Dial the called party number or feature access code.
(5)
Hold key
To place a call on hold.
(6)
Transfer key
Allows the terminal user to transfer established calls to another
terminal, without attendant assistance.
(7)
Speaker key (with light)
To control the built-in speaker which can be used for handsfree
dialing or monitoring.
(8)
Cursor key
Enter key
To determine the selected item in the menu. Also, this key is
used as cursor-movement key on the local menu of the
terminal.
This terminal has Shortcut Menu for frequently-used features.
Use this key to display the Shortcut Menu (Note: For only classic
mode)
Volume (UP/DOWN) key
Used to adjust speaker/receiver volume, and ringer volume.
Right key (Directory)
Press this key to open the Directory menu.
(Note: For only classic mode)
Left key (Redial)
Press this key to activate Redial feature. Press Redial and
scroll back through numbers that have been dialed. When
the desired number is displayed, press or to
activate dialing. ( Note: For only classic mode)
(9)
Menu key
To access the menu of terminal.
(10)
Mic key
To respond handsfree. LED lights during speakerphone operation.
(2)
(16)
(20)
Touch button area
(19)