NEC UNIVERGE DT930 - To Change Inquiry Time; TO DISPLAY Bluetooth  MODULE INFORMATION

TERMINAL SETUP
36
7. If you want to disconnect the device,
 Press local softkey 3 (Option).
8. Select “ 1 Disconnect”
You can switch to connect and
disconnect the device easily by tapping
the device name at procedure 5.
TO CHANGE INQUIRY TIME
1. Display the Menu screen, and select “Settings”
2. Select “ 6 Option Device”.
3. Select “ 1 Bluetooth”
4. Select “ 3 Additional setting”
5. Select “ 1 Inquiry Time”
6. Select desired inquiry time.
TO DISPLAY Bluetooth

MODULE
INFORMATION
1. Display the Menu screen, and select “Settings”
2. Select “ 6 Option Device”.
3. Select “ 1 Bluetooth”
4. Select “ 4 Bluetooth Information”
Displayed information as follows.
 Device name
 Device address
 Firmware version
 Core version
 HFP(AG) version