Need help?Do you have a question about the NEC SL 1000 and is the answer not in the manual?
General| Brand | NEC |
|---|---|
| Model | SL 1000 |
| Category | Telephone System |
| Language | English |
Configures the system's time and date.
Sets up IP Address, Subnet-Mask, and Default Gateway addresses.
Sets the system numbering plan, affecting extension and trunk dialing.
Sets the extension number for multiline, single line, and IP telephones.
Sets up the Night Mode options.
Defines the Speed Dialing functions.
Sets basic options for each trunk port.
Sets basic options for each analog trunk port.
Sets up an outbound routing table for trunk groups.
Defines basic settings for each extension.
Sets up various multiline telephone options.
Sets various system options.
Assigns a Class of Service (COS) to an extension.
Sets system options for Outgoing Call Service.
Assigns a Toll Restriction Class to an extension.
Sets system Toll Restriction classes (1 ~ 15).
Defines system options for incoming calls.
Assigns incoming trunk type for each trunk.
Assigns extensions to Call Pickup Groups.
Defines system options for the Hold feature.
Defines system options for the Transfer feature.
Defines basic setting of each VRS/DISA line.
Defines system options for Automatic Route Selection (ARS/F-Route).
Sets pre-transaction tables for selecting Automatic Route Selection (ARS/F-Route).
Assigns 15 Dial Treatments for automatic ARS dialing translation.
Sets ARS Class of Service for an extension.
Defines system options for ARS/F-Route feature.
Defines up to 64 Service Tones.
Defines various basic data parameters for the COIU.
Sets basic information of the H.323 Trunk.
Sets the system passwords.
Assigns status to system alarms and reporting.
To Next Page
