NEC SL 1000 - Program 10: System Configuration Setup

Programming the SL1000/SL1100
SECTION 1 PROGRAMMING YOUR SYSTEM
The information contained in this chapter provides the information necessary to properly program your
system.
The programming blocks are organized into the following programming modes.
Program Number : Program Name
Program 10 : System Configuration Setup on page 2-2
Program 11 : System Numbering on page 2-60
Program 12 : Night Mode Setup on page 2-92
Program 13 : Abbreviated Dialing on page 2-102
Program 14 : Trunk, Basic Setup on page 2-110
Program 15 : Extension, Basic Setup on page 2-128
Program 16 : Department Group Setup on page 2-169
Program 20 : System Option Setup on page 2-174
Program 21 : Outgoing Call Setup on page 2-238
Program 22 : Incoming Call Setup on page 2-264
Program 23 : Answer Features Setup on page 2-290
Program 24 : Hold/Transfer Setup on page 2-293
Program 25 : VRS/DISA Setup on page 2-301
Program 26 : ARS Service & Least Cost Routing on page 2-317
Program 30 : DSS/DLS Console Setup on page 2-330
Program 31 : Paging Setup on page 2-342
Program 32 : Door Box and Sensor Setup on page 2-353
Program 34 : Tie Line Setup on page 2-357
Program 35 : SMDR Account Code Setup on page 2-370
Program 40 : Voice Recording System on page 2-379
Program 42 : Hotel Setup on page 2-383
Program 44 : ARS/F-Route Setup on page 2-396
Program 45 : Voice Mail Integration on page 2-410
Program 47 : InMail on page 2-415
Program 80 : Basic Hardware Setup for System on page 2-457
Program 81 : Basic Hardware Setup for Trunk on page 2-476
Program 82 : Basic Hardware Setup for Extension on page 2-490
Program 84 : Hardware Setup for VoIP on page 2-511
Program 90 : Maintenance Program on page 2-548
Program 92 : Copy Program on page 2-626
Program 93 : System Information on page 2-636
Programming Manual 2-1
Programming the SL1000/SL1100
2