Program 15 : Extension, Basic Setup
15-28 : Trunk Incoming Ring Tone of Extension Setup
Level:
IN
(This Program is available for V1.5 or higher)
Description
Use Program 15-28 : Trunk Incoming Ring Tone of Extension Setup to define the ringing tone for
each trunk port of extension.
Input Data
Extension Number Up to four digits (SL1000)
Up to eight digits (SL1100)
Trunk port number 001 ~ 126 (SL1000)
001 ~ 096 (SL1100)
Day/Night Mode 1 ~ 8
Item
No.
Item Input Data Description Default Related
Program
01 Trunk Incoming
Ring Tone
0 = Trunk incoming ring
tone (SL1000)
1 = Tone pattern1
(SL1000)
2 = Incoming external
ring tone (SL1000)
3 = Tone pattern 3
(SL1000)
4 = Tone pattern 4
(SL1000)
5 = Tone pattern 5
(SL1000)
6 = Tone pattern 6
(SL1000)
7 = Tone pattern 7
(SL1000)
8 = Tone pattern 2
(SL1000)
0 = Trunk incoming ring
tone (SL1100)
1 = High (SL1100)
2 = Middle (SL1100)
3 = Low (SL1100)
4 = Melody 1 (SL1100)
5 = Melody 2 (SL1100)
6 = Melody 3 (SL1100)
7 = Melody 4 (SL1100)
8 = Melody 5 (SL1100)
Assign individual ring tones at ex-
tension for each trunk and each
Night mode.
When 0 (Trunk incoming ring tone)
is selected, it follows the setting of
Program 15-02-02.
When 2 (Incoming external ring
tone) is selected, it follows the set-
ting of Program 22-03. (SL1000)
0 22-03
15-02-02
ISSUE 3.01 SL1000/SL1100
Programming Manual 2-167
Program
15
To Next Page
Loading...
