Program 10 : System Configuration Setup
10-26 : IP System Operation Setup
Level:
IN
Description
Use Program 10-26 : IP System Operation Setup to enable or disable the Peer to Peer feature for
SIP MLT and SIP IP stations.
Input Data
Item
No.
Item Input Data Description Default
02 RTP Forwarding
Mode
0 = Disable
1 = Enable
0
03 SIP Peer to Peer
Mode
0 = Off
1 = On
1
04 DR700 Peer to Peer
Mode
0 = Off
1 = On
1
05 SIP CTI Mode 0 = Disable
1 = Mode1
When SIP CTI Mode is set as 1 (Mode1) it
will ignore the setting at 10-26-03.
0
Conditions
• Disabling 10-26-04 results in SIP MLT Station-to-SIP MLT Station calls using a DSP resource.
• SIP-to-SIP MLT Station does not support Peer to Peer function and will result in using a DSP
resource.
• Disabling 10-26-03 results in SIP IP Station-to-SIP IP Station calls using a DSP resource.
Feature Cross Reference
None
ISSUE 3.01 SL1000/SL1100
Programming Manual 2-33
Program
10
To Next Page
Loading...
