NEC SL 1000 - Wizard Programming Level Setup

Program 90 : Maintenance Program
90-35 : Wizard Programming Level Setup
Level:
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Use Program 90-35 : Wizard Programming Level Setup to set the maintenance level for Wizard
Programming.
Input Data
Wizard Number 1 ~ 250
Item
No.
Item Input Data Default
01 Maintenance Level 0 = All (Display Data)
3 = SB (System Administrator B) (Display Data)
4 = SA (System Administrator A) (Display Data)
5 = IN (Installer Level) (Display Data)
6 = MF (Manufacture Level) (Display Data)
0
Conditions
None
Feature Cross Reference
None
ISSUE 3.01 SL1000/SL1100
Programming Manual 2-599
Program
90