NEC SL 1000 - Voipdb DSP Resource Selection

Program 10 : System Configuration Setup
10-19 : VoIPDB DSP Resource Selection
Level:
IN
Description
Use Program 10-19 : VoIPDB DSP Resource Selection to define the criteria for each DSP resource
on the VoIPDB unit.
Input Data
DSP Resource Number 01 ~ 16
Item
No.
Item Input Data Description Default
01 VoIPDB DSP Re-
source Selection
0 = Common use for
both IP extensions and
trunks
1 = Use for IP exten-
sions
2 = Use for SIP trunks
5 = Blocked
6 = Common without
unicast paging
7 = Multicast paging
8 = Unicast paging
This program is used to assign the 16 re-
sources of the VoIPDB.
NEC recommends leaving the default set-
tings as system default.
Resource 1 ~ 16
= 0
Conditions
None
Feature Cross Reference
None
SL1000/SL1100 ISSUE 3.01
2-28 Program 10 : System Configuration Setup
Program
10