Program 14 : Trunk, Basic Setup
14-11 : ID Setup for IP Trunk
Level:
IN
Description
Use Program 14-11 : ID Setup for IP Trunk to set the ID of each IP Trunk. This program refers to
incoming and outgoing IP Trunk calls. The ID is sent on an outgoing IP Trunk call. This program is
used only for H.323.
Input Data
Trunk Port Number
001 ~ 126 (SL1000)
001 ~ 096 (SL1100)
Item
No.
Item Input Data Default
01 IP Trunk ID 0 ~ 65535
(0 = No Setting)
0
Conditions
• This Data is referred to at IP trunk outgoing call, or IP trunk incoming call.
• This ID is notified at IP trunk outgoing call.
• It is not notified when ID is 0.
• Incoming Call arrives to the trunk port of the same ID as ID notified from the partner system.
Feature Cross Reference
None
ISSUE 3.01 SL1000/SL1100
Programming Manual 2-125
Program
14
To Next Page
Loading...
