Program 92 : Copy Program
92-06 : Fill Command
Level:
IN
Description
Use Program 92-06 : Fill Command to allocate the data of each extension number of each extension
group or each table.
Input Data
Program Number XX - XX
Item No. Item Input Data
01 Source Number Each extension port = 001 ~ 128 (SL1000) 001 ~ 120 (SL1100) (Program
11-02)
Each virtual extension port = 01 ~ 50 (Program 11-04)
Each extension group = 1~32 (Program 11-07)
Destination Number (From)
Destination Number (To)
The following table lists Programs that use the Fill Command function.
Program Number Program Name
11-02 Extension Numbering
11-04 Virtual Extension Numbering
11-07 Extension (Department) Group Pilot Number
Conditions
None
Feature Cross Reference
None
SL1000/SL1100
ISSUE 3.01
2-634 Program 92 : Copy Program
Program
92
To Next Page
Loading...
