15-07-01 TEL
KY01 = *01
- +
(IP Phone) (SL1000)
15-07-01 TEL
KY01 = *01
- +
(SL1100)
tells you to enter the programming mode, dial 150701 from the telephone dial pad. After you do, you
will see the message “15-07-01 TEL” on the first line of the telephone display. This indicates the
program number (15-07), item number (01), and that the options are being set for the extension. The
second row of the display “KY01 =
01” indicates that Key 01 is being programmed with the entry of
01. The third row allows you to move the cursor to the left or right, depending on which arrow is
pressed. To learn how to enter the programming mode, refer to How to Enter Programming Mode on
page 1-2.
SECTION 3 HOW TO ENTER PROGRAMMING MODE
To enter programming mode :
1. Go to any working display telephone.
In a newly installed system, use extension (port 1).
2. Do not lift the handset.
3. Press Speaker.
4. #
#
.
SL1000/SL1100 ISSUE 3.01
1-2
Introduction
To Next Page
Loading...
