Program 22 : Incoming Call Setup
22-03 : Trunk Ring Tone Range
Level:
IN
Description
Use Program 22-03 : Trunk Ring Tone Range to select the ring tone range for the trunk. The trunk
uses a ring tone in the range selected when it rings an extension. Eight ring tones are available.
Customize the Trunk Ring Tones in Program 82-01.
Input Data
Trunk Port Number 001 ~ 126 (SL1000)
001 ~ 096 (SL1100)
Item
No.
Item Input Data Description Default
Related
Program
01 Ring Tone Pat-
tern
0 = Ring Tone Pattern
1 (1) (SL1000)
1 = Ring Tone Pattern
2 (2) (SL1000)
2 = Ring Tone Pattern
3 (3) (SL1000)
3 = Ring Tone Pattern
4 (1) (SL1000)
4 = Ring Tone Pattern
5 (2) (SL1000)
5 = Ring Tone Pattern
6 (3) (SL1000)
6 = Ring Tone Pattern
7 (3) (SL1000)
7 = Not Used (SL1000)
8 = Not Used (SL1000)
0 = Ring Tone Pattern
1 (SL1100)
1 = Ring Tone Pattern
2 (SL1100)
2 = Ring Tone Pattern
3 (SL1100)
3 = Ring Tone Pattern
4 (SL1100)
4 = Melody 1 (SL1100)
5 = Melody 2 (SL1100)
6 = Melody 3 (SL1100)
7 = Melody 4 (SL1100)
8 = Melody 5 (SL1100)
9 = Ring Tone Pattern
5 (V3.0 Added)
(SL1100)
10 = Ring Tone Pattern
6 (V3.0 Added)
(SL1100)
11 = Ring Tone Pattern
7 (V3.0 Added)
(SL1100)
12 = Ring Tone Pattern
8 (V3.0 Added)
(SL1100)
Use this program to select the ring
tone range for the trunk. The trunk
uses a ring tone in the range selec-
ted when it rings an extension. Eight
ring tones are available.
0 15-02
ISSUE 3.01 SL1000/SL1100
Programming Manual 2-267
Program
22
To Next Page
Loading...
